![](http://pdfasset.owneriq.net/6/b9/6b987e72-a4f4-4ccb-87ec-e3052083ac5a/6b987e72-a4f4-4ccb-87ec-e3052083ac5a-bg61.png)
S3F80P5_UM_ REV1.00 CONTROL REGISTERS
PP — Register Page Pointer DFH Set1 Bank0
Bit Identifier .7 .6 .5 .4 .3 .2 .1 .0
Reset Value
0 0 0 0 0 0 0 0
Read/Write
R/W R/W R/W R/W R/W R/W R/W R/W
Addressing Mode
Register addressing mode only
.7− .4
Destination Register Page Selection Bits
0 0 0 0
Destination: page 0
(See Note)
.3− .0
Source Register Page Selection Bits
0 0 0 0
Source: page 0
(See Note)
NOTE: In the S3F80P5 microcontroller, a paged expansion of the internal register file is not implemented. For this reason,
only page 0 settings are valid. Register page pointer values for the source and destination register page are
automatically set to ‘0000B’ following a hardware reset. These values should not be changed curing normal
operation.
4-35