Filter
Top Products
2-10
English
4. Remove the bracket-HDD from the product by separating the power supply cable, signal
transmission cable (IDE cable), and fan cable then pulling it toward the center of the product
to separate its fixed part from the bottom.
5. Mount the HDD to the bracket-HDD with the SCREW-SPECIAL (BWH, 6-32UNC, L10.5)
(4 spots) that was provided as an accessory. (The screws have to be tightened so that it
doesn’t vibrate loose.)
SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 2-10