Filter
Top Products
English
SHR-2040/2041/2042 USER’S MANUAL
5-5
Load Factory Default
● It used to initialize all the menu setup values. The recorded data will not be deleted.
Press “OK” in the confirmation window to start initializing.
● Password Lock
If it is set to On, a pop-up window for user validation (You have to fill in the Setup,
ID, and Password fields.) appears every time you select a menu. If it is set to Off,
you can enter menus without entering the password.
● Record Lock
If the Record Lock is set to On, a pop-up window, asking for the password appears
while disabling the recording.
● User Authority
You can select any of Search, Backup, PTZ, and Shutdown. As an example, if the
user has no access right for Search, the user cannot enter the Search menu.
● All Key Lock On
If you select this, the system will enter the live mode immediately. If you press any
button on the front panel or remote control, the password input window appears. If
the correct password is input, the lock function is deactivated.
Note
Note
[All Key Lock On]
If you select this, the system immediately switches to the live mode and all buttons are locked.
SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 5-5