Filter
Top Products
English
1. There are two USB connecting ports on the front and back of SHR-2040/2041/2042.
2. USB Hard Disk, USB CD/DVD, and USB Memory are connected through the front and back
ports of SHR-2040/2041/2042.
3. Only one USB device can be connected with each USB connecting port.
4. If the USB HDD is connected to the system, it should be detected and set through
Menu - System - HDD setup before the operation.
5. It supplies the function of HOT PLUG, which connects/removes the USB device, during the
system operation.
Caution
Caution
- USB port on the front and back of SHR-2040/2041/2042 cannot be connected to same kinds
of USB device. (For example, the case is that 2 CD-RW devices or 2 USB Memories are used
by connection with the front and back of system.)
- If you use the USB Memory on SHR-2040/2041/2042, it should be composed of the format
being supported by SHR-2040/2041/2042. Although you format it with FAT32 format on PC,
it will be re-formatted, in case of (when) connecting with SHR-2040/2041/2042.
Caution
Caution
- The hard disk of USB device should be set to Master.
Note
Note
See 5-8 System (HDD Setup) of User’s Manual.
SHR-2040/2041/2042 USER’S MANUAL
3-5
3
Connecting the USB
SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 3-5