Filter
Top Products
English
SHR-2040/2041/2042 USER’S MANUAL
5-3
● Date Format
The system supports 3 formats, YYYY-MM-DD / DD-MM-YYYY / MM-DD-YYYY.
● Time Format
The system supports 2 formats, 24 Hour / 12 Hour(AM/PM).
● Language
After selecting a language, OSD is expressed in the selected language.
The available language is added in the list.
● Time Zone
Set the local time zone based on the Greenwich Mean Time (GMT).
● Time Synchronization
The time of your DVR can be synchronized by a specified server. For this purpose,
enter the IP address of the time server and determine the initiator of this activity.
- Automatic Time Synchronization Synchronizes while gathering time information
from the Time Server (IP)
- Activate by Server(Master)Time Synchronization is executed while more than
two DVR devices are connected, and the operating DVR device connected to
the server is set as standard.
Note
Note
[Date/Time Change]
Pressing “OK” after you change date and time, you will be asked by a pop-up window
if you really confirm the change. Here, press ”Yes” to change the time. Since Date/Time does
not change in backup process, be sure to stop the backup process before you change
Date/Time. If the date or time is changed, the system reboots.
Caution
Caution
[Date/Time Change]
If the Date/Time changes to the original value, the data recorded before the change may be
deleted. For example, if the time is changed from 8 am to 7 am, all the data recorded between
7 am and 8 am will be deleted.
Automatic Time Synchronization
Time Server(IP)
Activate by Server(Master)
Last Synchronization Time
2007-01-26 12:39:12 Fail
203.248.240.103
Off
Off
Time Synchronization Setup
SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 5-3