Filter
Top Products
English
5-28
The scheduling is enabled by selecting alarms, days and time blocks. The default setting is
Event Driven. For each alarm or beep, you can activate or deactivate alarming. In case of
Event Driven, the alarm can be sent only when an event is issued.
● AO >: It indicates Alarm Out. All alarms are changed according to Alarm1 when it
pressed.
● 0 to 23: Time values for horizontal row.
● S to H: Days (Sunday to Saturday) and Holiday (H).
● ALL: Press this and it changes the overall settings in the current window to Off,
On, and Event Driven.
● Off: Sets not to issue an alarm during the setting time.
● On: Sets to issue an alarm during the setting time.
● Event Driven: Sets to issue an alarm when an event occurs during the setting
time.
● Holiday If you press Holiday, a calendar window appears for you to designate
holidays. Place the cursor to a date and press the ENTER button to complete
designation. (When pressing the ENTER button again, the setting is cancelled.)
Alarm Out Schedule
You can schedule the automatic output for alarms.
CancelOK
Alarm Out Schedule
AO Alarm 1 Alarm 2 Alarm 3 Alarm 4 Beep
Holiday
Off
On
Event Driven
All
S
M
T
W
T
F
S
H
SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 5-28