Samsung SVR-1670 DVR User Manual


  Open as PDF
of 65
 
Digital Video Recorder User Guide
32
Digital Video Recorder User Guide
33
3. Turn on the hub or router.
4.TurnontheSVR-1670.
To prevent damage to the SVR-1670, wait to turn the power on until after you have connected
the Ethernet cable.
Always turn off the SVR-1670 and unplug the power cable before you attach or remove a hard
disk drive. Disconnect any devices that are connected to an external power source.
This section describes how to work with a hard disk drive, in the following subsections :
•InstallingaHardDiskDrive
•EnablingaHardDiskDrive
•RemovingaHardDiskDrive
•DisablingaHardDiskDrive
3. 6 Hard Disk Drive Installation
Installing a Hard Disk Drive
1.Opentheuppercoveroftheproduct,andthenremovethefourscrewsthatconnectthehard
disk drive bracket and main unit.
Figure 3.6.1 Removing Screws that Connect the SVR-1670 & Hard Disk Drive Bracket
Chapter 3. Hardware Installation
A
A
D
B
C
C
B
D
2. Lift up the hard disk drive bracket, and then insert a hard disk. Fasten the disk to the bracket
usingtheenclosedxturescrews,asshowninthepicturebelow.
3.ReattachtheharddiskdrivebrackettotheSVR-1670mainunit.
4.Oncethebracketissecurelyattached,connecttheSATAcable.
Figure 3.6.2 Inserting Hard Disk to the SVR-1670
Figure 3.6.4 Connecting SATA cable
Figure 3.6.3 Reattaching Hard Disk Drive Bracket to the SVR-1670
 previous next