Samsung SVR-1670 DVR User Manual


  Open as PDF
of 65
 
Digital Video Recorder User Guide
46
Digital Video Recorder User Guide
47
Chapter 5. Quick Setup
3.OnceyouhavecompletedtheRecordsetup,noticetheReclightontheDVR’sfrontpanel
ickersandthesymbolSdisplaystoshowthatallchannelsarerecordingasscheduled.
Setting the system time is very important for the validity of your recorded data. The date and time
you set governs all schedules your subsequently congure for the DVR. The date and time appear
on all monitor displays and on all timestamps for events.
5. 3. Setting the Date and Time
Plan carefully if you need to set the date and time!
Back up video before changing the time.
Do not change time setting while recording. Doing so can compromise the date stamping of
the recording.
To set the date and time, follow these steps :
1.SelecttheTimeoptionfromtheQuickSetmenu.
2.Enterthetimezoneforthecameralocation.(ThedefaultsettingisUTC00:00Dublin.)
3. Set Daylight Savings to on or off. (The Daylight Savings option is only available if daylight
savingtimeisusedinthetimezoneyouselected.)
4.SelecttheDateFormatyouprefer.
-FormatsareYYYY/MM/DDorMM/DD/YYYYorDD/MM/YYYY.
5.SettheTimebyenteringdataineachoftheDateeldsandintheHour/Minutes/Seconds
elds.
6.ClicktheApplyDate/Timebuttontoconrmandsavethesettings.
·Whentheconrmationmessageappears,selectYesifyouwanttoconrmyourchangesto
thedate/timesetting.
Figure 5.3.1 System Time Submenu on Quick Setup
Chapter 6. Using the System Setup Menu
ThischapterprovidesinformationaboutthefeaturesontheOSD’sSystemSetupmenu,from
whichyousetupvarioussystem-widecontrolsfortheDVR
The information is presented in these sections :
▶
6.1UsingtheSystemSetupOptions
▶6.2UsingtheDiskOptionsontheSystemSetupMenu.
▶6.3WorkingwithPasswordsandPermissions.
You access the System Setup menu by clicking its tab on the OSD. This section explains its four
submenus, their options and settings.
Figure 6.1.1 System submenu on the System Setup Menu
Option Settings
Language Select a language.
Key Buzzer
Select On if you want a buzzer to sound when you use the buttons on the front panel.
Default
Select if you want to restore the factory default settings. At the warning message,
select “Yes” again to restore the settings.
Load/Save
Configuration
Select Save if you want to save settings to USB storage.
Select Load if you want to load stored settings from USB storage.
Firmware Update Select to update firmware from USB storage and connect it to the SVR-1670
DVR Alias
Set a SVR-1670 alias; that is, give the SVR-1670 its own name such as “Main
Floor,” “Headquarters,” or “Fred.”
System Log Displays a log, by time, of various events within the system
Time
Set the system time. You can set the time in two places: here and on the Quick
Start menu.
6. 1 Using the System Setup Options
 previous next