Samsung SVR-1670 DVR User Manual


 
Digital Video Recorder User Guide
34
Digital Video Recorder User Guide
35
A
A
D
B
C
C
B
D
5.ConnecttheSMPS(switchedmodepowersupply)powercable.
6.ClosetheuppercoverontheSVR-1670,andthenreconnectalldevicesthatwereremovedfor
the hard drive installation.
Now,itistimetocongureandactivatetheharddiskdrive.
Figure 3.6.5 Connecting SMPS Power Cable (Change the Image)
Figure 3.6.6 The SVR-1670 Connected with Maximum Number of HDDs
Chapter 3. Hardware Installation
Enabling a Hard Disk Drive
Toenablethenewlyattachedharddiskdrive,youmustchangeitsavailabilityto"O"onthe
SVR-1670’sDiskManagermenu.
1.FromtheOSD,selecttheSystemSettingsmenu.
2.SelecttheDisksubmenu,andthen,onit,selectDiskManager.
-ThenewlyinstalledharddiskdriveappearsinthelistalongwithOandXundertheState
category.
3.TochangetoEnabledstatus,selecttheharddiskdrivetoconnectandthenpressESCtoexit
theDiskSelectionmenu.Toenabletheharddiskdrive,selectAddandthenpressEnter.You
can add the hard disk drive to store data.
Figure 3.6.7 Disk Manager Menu Showing Disabled Hard Disk Drive
Figure 3.6.8 Disk Manager Menu Showing Enabled Hard Disk Drive