Samsung SVR-1670 DVR User Manual


  Open as PDF
of 65
 
Digital Video Recorder User Guide
86
Digital Video Recorder User Guide
87
Figure 10.2.1 PTZ Menu
Option Description
P/T
P/T stands for Pan/Tilt. Select this button to operate the Pan or Tilt features of the
camera.
Z/F
Z/F stands for Zoom/Focus. Select this button to operate the Zoom or Focus
features of the camera.
Menu Opens the PTZ menu. To exit the menu, press the PTZ button on the front panel.
Preset
with Load and
Save
You can define where and how you want the camera to position itself.
Aux
with On and Off
Aux stands for Auxiliary, meaning special functions of your particular brand or
model of PTZ camera. For this option, you enter the number that corresponds to
the particular auxiliary function you want to use.
Using Pan/Tilt
Using Zoom/Focus
Loading and Saving Presets
Topanortiltacamera,selectP/TfromthePTZmenu.
· To pan the camera, press the left or right arrow key on the front panel, or click the left or right
area of the screen.
· To tilt the camera, press the up or down arrow key on the front panel or click the top or bottom
of the screen.
Tozoomorfocusacamera,selectZ/TfromthePTZmenu.
·Usethemouseofthebuttonsonthefrontpaneltozoomorfocusontheimage.
Apresetisadenedcameraposition;youpresetthecameraangleandfocus.
YoumustrstsetupcamerapresetwithPTZattachedtoeachchannel.
To activate a preset location :
1.GotothePTZmenu.
2. Select a preset number.
3.SelectLoadandthenpresstheENTERbutton.
Thecamerawillpan,tiltorzoomtothespecicationsofthatpresetcondition.
To save a position—in other words, to make it a preset :
1.Pan,tiltandzoomthecamerauntilitadjustedtothepositionyouwanttosave.
2.GotothePTZmenu.
3.InthePreseteld,selectapresetnumber.
4.SelectSaveandthenpresstheENTERbutton.
Setting Auxiliary Functions
Setting the Console Menu
TheAuxiliaryfeatureisusedforspecialfunctionsofaPTZcamera.Specicfeaturesdepend
ontheparticularmakeandmodelofcamerayouareusing.Refertothemanufacturer’s
documentationforinformationonauxiliaryfunctions.
To use the Auxiliary function :
1.GotothePTZmenu.
2.ToturnontheAuxiliaryfunction,selectOn.
3.Setupto16Auxiliarynumbers.
4.ToturnoffanAuxiliaryfunction,selecttheAuxiliarynumberyouwishtoturnoffandselectOff.
IfthePTZcameraisconnectedtotheDVRwiththeSamsungSPDprotocol,youcancongurethe
camera using its console menu.
To access a camera’s console menu :
1.Usethenavigationkeysonthefrontpaneltoselectcamerasettings.
2.PressENTERtoacceptyoursettings.
Chapter 10. Camera Commands
 previous next