Samsung SVR-1670 DVR User Manual


  Open as PDF
of 65
 
Digital Video Recorder User Guide
84
Digital Video Recorder User Guide
85
4.Onceyouhavesetupthesequences,closetheSeqsubmenutoreturntotheMonitorsubmenu
to set the Dwell Time.
5. For the Dwell Time option, enter the amount of time you want each channel to appear on the
monitor(from1to60seconds).
·YoumustsetaDwellTimetoactivateAutoSequencing.IfDwellTimeissettoOff,Auto
Sequencingwillnotwork.
Running Auto Sequencing
TherearetwowaystoturnonAutoSequencingsoyoucanviewitonyourmonitor:
·Onthefrontpanel,presstheAUTObutton.
·OntheFunctionKeymenu,presstheAutobutton .
TostopAutoSequencing,presseitherbuttonagain.(Thisstopsitfromrunning;itdoesnot
erase your settings.)
9. 5 Configuring Multi Display Layouts
You can congure which channels you want to display in the 4E, 9B and 10A multichannel setting.
You set up multi display while entering settings for the options on the Monitor submenu of the Displays
Settings menu :
1.OntheMonitorsubmenu,selecttheMonitorforwhichyouaresettingoptions.
2.FortheMultiDisplayoption,selectrstthecongurationyouwanttoset:4E,9Bor10A.
3.Next,accesstheMultiDisplaysubmenu.
TheMultiDisplaysubmenushowsgridappropriatetothecongurationyouselected:splitby
4,splitby9,orsplitby10.
4.ClickintheChannel’sboxforeachchannelyouwanttoincludeinthemultidisplay.For
example,ifyouaresettingupa9B,select9channels.
-Thegriddisplayswherethechannel’simagewillappear.
-Theorderinwhichyouclicktheboxesistheorderinwhichthechannelsappearonthegrid.
Figure 9.5.1 Multi Display Layouts
Chapter 10. Camera Commands
Thischapterexplainshowyouexecutevariouscameracommands,whileviewinglivevideo,
fromcontrolsontheFUNCmenuandonthePTZmenu.
The information is presented in these sections:
▶10.1CameraCommandsfromtheFUNCMenu
▶10.2Pan/Tilt/ZoomCommands
10. 1 Camera Commands from the FUNC Key Menu
10. 2
Pan/Tilt/Zoom Commands
While viewing live video, you can use the FUNC menu pause the video and zoom in on the image.
If you connect a PTZ controller to you PTZ camera, you can control pan, tilt and zoom while watching
live video. Once you have the controller congured, you can access and work with the PTZ menu.
Pausing Live Video
Accessing the PTZ Menu
Zooming In on Live Video
Topauselivevideo,pressthePAUSEbutton.Pressthebuttonagaintoresumelivevideo.
1. Press the channel button to select the channel you wish to view.
2.PresseitherthePTZbuttonortheFUNCbuttononthefrontpanel.
3.ThePTZmenuappears,superimposedonthecamera’simage.
Whenviewingasinglechannelinfull-screenmode,youcanzoominontheimage.Zooming
allowsyoutomovein18levelshorizontallyand12levelsvertically.
1.PressFUNCtoaccesstheFunctionmenu.
2.SelecttheZoom button.
· The camera location defaults to the center of the screen.
3.Selectthe“Plus”buttonandpressENTERorleft-clickthevideopane.
·Torepositiontheimage,usethenavigationkeysontheFUNCmenu:
Chapter 9. Camera and Monitor Display Setup
 previous next