Samsung SVR-1670 DVR User Manual


  Open as PDF
of 65
 
Digital Video Recorder User Guide
64
Digital Video Recorder User Guide
65
Chapter 7. Communication To/From the DVR
Setting Serial Ports
Setting PTZ Options
Tosettheserialport,rstselecttheCOM(communicationport):
∙COM1andCOM3arexedtoRS-232C
∙COM2usesRS-422/RS485
∙COM4usesRS-485.
1.AccesstheSerialsubmenu(totherightoftheCOMselection).
2. For the Devise option, select a connected device.
3.Settheotherselections—Baudrate,theParity,StopBitandDataBit—asappropriateforthe
deviceyou’vechosen.
TosetPTZoptionsforyourcameras,rstspecifythecamera’schannel,1through16.
1.AccessthePTZsubmenu(totherightofthePTZchannelselection).
2.SetPTZHometoOnifyouwantthecameratoreturntohomeifPTZisnotcontrolledfora
speciedperiodoftime.Otherwise,settoOff.
3.IfPTZHomeissettoOn,setthePTZIdleTime.Thisisthedurationoftimebeforewhichthe
camerareturnstohome.Forexample,ifyousetthisto5seconds,PTZreturnstoHomewhen
PTZisnotcontrolledformorethan5seconds.
4.SetthePTZPortbyselectingtheporttowhichthecamerachannelisconnected.
5.SelecttheCameraIDoftheconnectedPTZcamera.
You can set up the SVR-1670 for streaming data. This section describes how to set up streaming
options.
• RTSP/TCP : Convenient to use in conjunction with a simple rewall that allows RTSP transmission.
• RTP/UDP : Effective when the latest video data from a camera must be transferred, even if it causes
video loss.
• RTSP Standard Port (554) : Select to use the RTSP standard port (554).
You can selectively block or allow IPs to access the SVR-1670.
7. 5 Setting Up Streaming Options
7. 6 Setting Up IP Filters
Option Setting
RTSP/TCP Select to use RTSP/TCP.
RTP/UDP Select to use RTP/UDP.
RTSP Standard
Port(554)
Select to use the RTSP standard port.
Option Setting
Use Select to use the IP filter.
Default Policy Select to block or allow IPs using the default policy.
IP Range Select a range of IPs to block or allow; Check the checkbox, and then enter the IPs.
 previous next