Sanyo DRW-500 DVD Recorder User Manual


 
-E45-
01 Untitled
03:25 SP
05/01/04
02 Untitled
02:28 HQ
05/01/04
03 Untitled
03:21 SP
05/01/04
04 Titles
SP Remain 01:00:03
Disc: Untitled Disc
RW TITLE CHP SP
4, 5, a, b
f
e
a (Play)
TOP MENU
ENTER
SEARCH
MODE
OPEN/CLOSE
n (Stop)
MENU
Number
buttons
CLEAR
DISPLAY
Basic Playback
Notes:
Do not touch the disc tray while it is moving.
Never place anything except a disc on the disc tray. Foreign
objects can damage the unit.
Do not apply excessive force to the disc tray.
Only one disc must be placed on the disc tray at a time.
When operation buttons are pressed, that operation is displayed
on the TV screen. The display turns off after several seconds.
1. Press [OPEN/CLOSE] to open the disc tray.
Note:
To open or close the disc tray, be sure to press [OPEN/
CLOSE]. Do not press the disc tray with your hand.
2. Place the disc with the label facing up on the disc tray.
See “Playable Discs” on page E38.
or
For 5-inch (12cm) disc For 3-inch (8cm) disc
3. Press [OPEN/CLOSE] again to close the disc tray.
Please wait until “CLOSE” ---> “DISC LOADING” ---> “STOP”
disappears on the TV screen.
Some discs may start playback automatically.
4. Start playback.
[DVD+RW] [DVD+R]
If a recorded DVD+RW or DVD+R disc is loaded, a title menu
screen may appear.
Example:
[DVD-Video]
Press [a] (Play) to start playback.
Elapsed playing time appears on the TV screen.
If a menu screen appears on the TV screen...
1) Press [o], [a], [p] or [b] (or the number buttons) to
select the desired menu.
2) Press [ENTER].
Playback of the selected menu starts.
Note:
For more details, please refer to the jacket or case of the
disc.
Notes:
Press [DISPLAY] repeatedly until the elapsed playing
time disappears, if necessary. (See page E50.)
In some discs, even if 4:3 PS is selected, the black bands
may remain on the TV screen.
If the disc is loaded with the label side downward (and it is a
single sided disc), or if a badly scratched disc is loaded, “NO
DISC” or “NO PLAY” appears on the TV screen. If this
occurs, load the disc correctly or replace the disc.
Stopping Playback
[DVD-Video][DVD+RW][DVD+R]
Press [n] once during playback.
“PRESS PLAY TO CONTINUE” appears briefly on the TV
screen.
When you press [a] (Play) again, playback starts automatically
from the point where you stopped. “PLAY” appears briefly on
the TV screen.
Note:
Some discs may not resume playback.
Press [n] twice during playback.
“STOP” appears briefly on the TV screen and playback stops
completely.
When you press [a] (Play), playback starts from the beginning
of the disc.
[CD]
Press [n] once during playback. The unit stops completely.
To turn off the power, press [POWER]. The clock appears on the
FL display.
1) Press [a] or [b] to select the title.
2) Press [ENTER] (or [a] (Play)) to start playback.
Elapsed playing time appears on the TV screen.
Example (FL display):