Sanyo DRW-500 DVD Recorder User Manual


 
-E53-
f
e
PICTURE DISC
OPERATION
KODAK Picture CD Playback
With KODAK Picture CD, it’s easy to turn film into pictures you
can email from your PC and view on this unit!
Just bring your film in for processing, and check the box for
KODAK Picture CD. You’ll get back your prints and negatives as
usual - plus you’ll get a special CD that contains your pictures
along with software that lets you view, enhance, share, and print
your pictures from your computer and view them on this unit.
1. Press [OPEN/CLOSE] to open the disc tray.
Note:
To open or close the disc tray, be sure to press [OPEN/
CLOSE]. Do not press the disc tray with your hand.
2. Place the disc with the label facing up on the disc tray.
3. Press [OPEN/CLOSE] again to close the disc tray.
Please wait until “CLOSE” ---> “DISC LOADING” ---> “STOP”
disappears on the TV screen.
The first thumbnail pictures (maximum 9-picture) appear on
the TV screen.
Example:
Need help? Call
1-800-813-3435
Important Note:
If “ ” appears on the TV screen during operation, the
operation is prohibited by the unit or the disc.
4. Press [o], [a], [p] or [b] to move the cursor to the desired
picture.
To go to the next or previous thumbnail pictures, press
[e] or [f].
5. Press [ENTER] (or [a] (Play)) to start the slide show from the
selected picture.
If you press [k] during the slide show, the slide show
stops temporarily. “PAUSE” appears.
Press [a] (Play) (or [k]) again to resume the slide show.
If the picture appears upside down, sideways, etc…
Press [o], [a], [p] or [b] as follows:
a : Rotate it 90 degrees clockwise.
b : Rotate it 90 degrees counterclockwise.
o : Change it to the vertically reversed image picture.
p : Change it to the mirror reversed image picture.
If you press [e] or [f] during the slide show, it skips
to the next picture or previous picture. “NEXT” or
“PREVIOUS” appears briefly.
To stop the slide show, press [n]. The thumbnail pictures
appear.
Notes:
If the disc is loaded with the label side downward, or if a badly
scratched disc is loaded, “NO DISC” or “NO PLAY” appears
on the TV screen. If this occurs, load the disc correctly or
replace the disc.
The file system is ISO9660 Level 1 and Level 2.
This unit can recognize up to 999 files or folders per disc. The
CD with 1000 files or folders and over is not available to this
unit.
FUJICOLOR CD cannot be used.
Some discs cannot be played back depending on the recording
conditions.
It would take 30 seconds or more for this unit to read KODAK
Picture CDs depending on its structure.
KODAK and Picture CD are registered trademarks of Eastman
Kodak Company.