Filter
Top Products
CHANGING THE ON-SCREEN DISPLAY
Selecting the On-screen Display
You can select to display or not the date, time, the
number of alarm recordings, tape speed and alarm
indication.
1 Turn the power on to all devices used.
2 Press the MENU button to display the (MAIN MENU
1) menu.
@@@@@@<MAIN@MENU@1>
1.LANGUAGE/CLOCK@SET
2.DISPLAY@SET
3.BUZZER@SET
4.VARIOUS@SET@1
5.VARIOUS@SET@2
6.RECORD@SET
7.TIMER@SET
8.HOLIDAY@SET
9.TAPE@MANAGEMENT
TO@MAIN@MENU@2
3 Press the SHIFT ] button to select the “2. DISPLAY
SET” line, then press the MENU button.
ø
The (DISPLAY SET) menu appears.
@@@@<DISPLAY@SET>
@DATE@@@@@@@@@@@@@Y
@TIME@@@@@@@@@@@@@Y
@ALARM@COUNT@@@@@@Y
@SPEED@@@@@@@@@@@@Y
@ALARM@NOTATION@@@Y
4 Press the SHIFT ] button, until the desired item for
which the display function will be set is flashing.
5 Press the DATA l (or j) button to set “Y” for the
desired functions described below.
DATE . . . . . . . . . . . . The date is displayed
TIME . . . . . . . . . . . . The time is displayed
ALARM COUNT. . . . The number of alarm
recordings is displayed
SPEED. . . . . . . . . . . The recording/playback
speed mode is displayed
ALARM NOTATION. The alarm recording type
(pre alarm recording, alarm
recording or post alarm
recording) will be displayed.
The message “PRE ALARM,
ALARM or POST ALARM”
will flash under the clock
display.
NOTE:
œ “PRE ALARM” will only be displayed during
playback.
6 Press the MENU EXIT button to save the settings.
Changing the Date/Time Display Position
1 Turn the power on to all input devices to the VCR.
2 Set the ON SCREEN switch to the “ON” position.
ø
The date and time are displayed.
10-15-2001@MON@000
15:20:00@@N12
3 Press the SHIFT \, ], * or + button.
ø
The display will move up, down, right or left.
NOTE:
œ If the SHIFT \, ], * or + button is kept pressed for 1
second or more the display will move at a faster speed.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000
English 15