Filter
Top Products
SETTING THE BUZZER
A buzzer can be set to sound during alarm recording, if
during recording the tape reaches the end, if buttons are
pressed or if there is a mechanical failure that causes the
tape to stop or be ejected, etc.
1 Press the MENU button to display the (MAIN MENU
1) menu.
2 Press the SHIFT ] button to select the “3. BUZZER
SET” line, then press the MENU button.
ø
The (BUZZER SET) menu appears.
@@@@<BUZZER@SET>
*BUZZER@@@@@@SET@UP
@@ALARM@IN@@@@@@@@Y
@@TAPE@END@@@@@@@@Y
@@KEY@IN@@@@@@@@@@N
@@WARNING@@@@@@@@@Y
@@THREAD@CHECK@@@@Y
@@VIDEO@LOSS@@@@@@Y
@@NON@REC@@@@@@@@@Y
@@CLOG@DETECT.@@@@Y
3 Press the DATA l (or j) button to select the desired
mode.
SET UP . . . . . . . . . . . . To use a predetermined
setting for each item
ALL OFF . . . . . . . . . . To set all items to “N”
ø
If using the “SET UP” setting, continue with
steps
4
and
5
.
4 Press the SHIFT ] button, until the desired item for
which the buzzer function will be set is flashing.
5 Press the DATA l (or j) button to set “Y” for the
functions described below.
ALARM IN . . . . . . . . The buzzer will be heard
during alarm recording.
TAPE END. . . . . . . . The buzzer will be heard
when the end of the tape is
reached during recording.
To stop the buzzer, press
the STOP, EJECT, FF,
REW or PLAY button.
KEY IN . . . . . . . . . . . The buzzer will be heard
when one of the VCR
buttons is pressed.
WARNING . . . . . . . . The buzzer will be heard if
the tape stops or is ejected
due to a problem with the
internal mechanism. To stop
the buzzer, press the STOP
button.
THREAD CHECK. . . The buzzer will be heard if
the tape is not loaded
properly.
VIDEO LOSS . . . . . The buzzer will be heard if
there is no video signal
during recording.
NON REC . . . . . . . . The buzzer will be heard if
during recording the VCR
enters a mode other than
recording.
CLOG DETECT . . . . The buzzer will be heard if
the heads are dirty and
recording qualtiy deteriorate.
6 Press the MENU EXIT button to save the settings.
NOTES:
œ If “N” is set, the buzzer will not be heard.
œ During timer recording mode, security lock engaged
mode and alarm recording mode, the buzzer will not be
heard when a button related to one of these modes is
pressed, even if “Y” is set for the “KEY IN” item.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000
English 43