Filter
Top Products
PLAYBACK
Search (Forward and Reverse)
1 Press the FF button during forward digital view (or
press the REW button during reverse digital view).
ø
A portion of the recorded images will be played
back.
ø
Large portions of the fields will be skipped and
therefore the complete recording cannot be seen.
ø
A still image playback will be displayed and
“NOW SEARCHING” appears until the next
pictures are displayed.
2 To return to normal playback, press the PLAY button.
ø
You can enter search from fast forward or rewind
mode. Press the
FF
button (during fast forward
mode) or
REW
button (during rewind mode).
NOTES:
œ The sound is muted.
œ If reverse search mode continues for 5 minutes or
more, the VCR will go into stop mode to avoid
damaging the mechanism.
Field Advance (Forward and Reverse)
1 Press the FF (or REW) button, during still image
mode.
ø
The still image is advanced (or rewound) of one
image (field).
2 To return to normal playback, press the PLAY button.
NOTES:
œ If the FF (or REW) button is kept pressed for about 1.5
sec. or more, continuous forward (or reverse) field
advance mode will be selected (this mode cannot be
selected through the RS-232C or RS-485 connection).
œ If reverse field advance mode continues for 5 minutes
or more, the VCR will go into stop mode to avoid
damaging the mechanism.
œ In reverse field advance mode, a still image playback
will be displayed and “NOW LOADING” will flash
on-screen while the data is being read to the memory.
While the message “NOW LOADING” is displayed, the
PLAY, FF, REW and STILL/PAUSE buttons will not
operate.
TAPE COUNTER
Using the counter, it is easy to find a desired recording.
1 Press the COUNTER RESET button, at the beginning
of the desired recording.
ø
The counter will be reset to “0 00 00”.
2 Press the COUNTER MEMORY button.
ø “[”
is displayed on the digital display.
ø
To cancel the counter memory function, press
the
COUNTER MEMORY
button a second time.
3 After recording or playback, press the REW button
from stop mode.
ø
The tape is rewound to the counter “0 00 00”
reading.
ø
If you rewind the tape past the “0 00 00” position,
press the
FF
button.
NOTES:
œ There is no tape counter indication for the blank
portions of the tape
œ There may be a slight discrepancy between the
position shown on the tape counter and the actual tape
position.
œ When rewinding the tape past the “0 00 00” position, a
minus (–) sign will be displayed.
œ This VCR is equipped with a memory function that,
while recording (or playback), will first store the pictures
in the internal memory before it actually records them
to tape (or outputs them to the screen). Therefore,
during recording/playback, the tape counter will start
and stop repeatedly.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000
40 English