Filter
Top Products
PROGRAM TIMER RECORDING
Setting the Holidays
By setting the holidays, timer recording will be conducted
on those days, as set for Sundays.
1 Press the MENU button to display the (MAIN MENU
1) menu.
2 Press the SHIFT ] button to select the “8. HOLIDAY
SET” line, then press the MENU button.
ø
The (HOLIDAY SET) menu appears.
@@@@@<HOLIDAY@SET>
@@1@@-----@@@11@@-----
@@2@@-----@@@12@@-----
@@3@@-----@@@13@@-----
@@4@@-----@@@14@@-----
@@5@@-----@@@15@@-----
@@6@@-----@@@16@@-----
@@7@@-----@@@17@@-----
@@8@@-----@@@18@@-----
@@9@@-----@@@19@@-----
@10@@-----@@@20@@-----
3 Press the DATA l (or j) button to set the month of
the holiday, then press the SHIFT * button.
4 Press the DATA l (or j) button to set the day of the
holiday.
5 Press the SHIFT ], \, +or * button until the next
line to set is flashing.
ø
Repeat steps
3
to
5
to set up to 20 holidays.
6 Press the MENU EXIT button to save the settings.
NOTES:
œ If setting holidays, be sure that a timer recording is set
for Sunday. If not, this function will not operate.
œ If a timer recording for Sundays is entered, the holidays
timer recording will not function if the program timer
recording mode is set to “N”.
œ To erase a setting, follow the same procedure as
above, but at step 3 and 4, enter “--” instead of a
setting.
Changing a Program Timer Recording
1 Press the MENU button to display the (MAIN MENU
1) menu.
2 Press the SHIFT ] button to select the “7. TIMER
SET” line, then press the MENU button.
ø
The (TIMER SET) menu appears.
3 Press the SHIFT ], \, +or * button until the setting
to correct is flashing.
4 Press the DATA l (or j) button to correct the setting.
5 Press the MENU EXIT button to save the settings.
6 Press the TIMER button.
To Cancel a Program Timer Recording
1 Press the MENU button to display the (MAIN MENU
1) menu.
2 Press the SHIFT ] button to select the “7. TIMER
SET” line, then press the MENU button.
ø
The (TIMER SET) menu appears.
3 Press the SHIFT ], \, +or * button until the “Y”
corresponding to the timer recording to cancel is
flashing.
4 Press the DATA l (or j) button to select “N”.
5 Press the MENU EXIT button to save the settings.
6 Press the TIMER button.
To Cancel all Program Timer Recordings
1 Press the MENU button to display the (MAIN MENU
1) menu.
2 Press the SHIFT ] button to select the “7. TIMER
SET” line, then press the MENU button.
ø
The (TIMER SET) menu appears.
3 Press the MENU RESET button.
ø
All programmed timer recordings are erased.
4 Press the MENU EXIT button, the normal screen is
displayed.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000
English 33