Filter
Top Products
ALARM RECORDING
Alarm Search
To go to the beginning of a desired alarm recording.
1 Press the SEARCH button during stop mode.
ø
“AL SEARCH 01” will be displayed on screen.
2 Press the DATA l (or j) button to set the desired
alarm number (1 to 99), then press the FF (or REW)
button.
ø
The alarm search will start.
ø
Playback will start just before the desired alarm
recording, then switch to a still image at the
beginning of the desired alarm recording.
NOTE:
œ The alarm number is relative to the actual tape
position. (Please refer to the illustration below.)
3 Press the PLAY button.
ø
Playback will start.
NOTE:
œ If during a search the end of the tape is reached, the
tape will rewind and stop. If the beginning of the tape is
reached, it will stop.
Alarm Scan
To look for an alarm recording by viewing the first 5
seconds of each alarm recording.
1 Press the SEARCH button twice during stop mode.
ø
“AL SCAN” will be displayed on screen.
2 Press the FF (or REW) button.
ø
The unit will advance (or rewind) the tape at high
speed and playback the first 5 seconds of every
alarm recording.
NOTES:
œ The playback of a block which includes the alarm
recording will start.
œ The playback will continue until the first 5 seconds
of the alarm recording are played back.
ø
To cancel the alarm scan mode, press the
STOP
button.
3 While the desired recording is being played back,
press the PLAY button.
ø
Playback will start, alarm scan mode is cancelled.
NOTE:
œ If during a scan the end of the tape is reached, the tape
will rewind and stop. If the beginning of the tape is
reached, it will stop.
Playback
112
Rewind direction
Fast-forward direction
Actual position
Alarm number 2
Alarm trigger input point
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000
English 29