Filter
Top Products
RECORDING USING AN EXTERNAL TIMER
INPUT
Recording can be controlled by an external start/stop
signal input at the EXT TIMER IN terminal.
Example 3: To record using the signal input at the
EXT TIMER IN terminal, in L24-hour
mode.
œ Follow the Before starting steps, under “NORMAL
RECORDING”.
NOTE:
œ External timer input recording can only be set on the
9th line (EXT) of the (TIMER SET) menu.
1 Press the MENU button to display the (MAIN MENU
1) menu.
2 Press the SHIFT ] button to select the “7. TIMER
SET” line, then press the MENU button.
ø
The (TIMER SET) menu appears.
3 Press the SHIFT ], \, + or * button, until the “SPD”
(recording speed) position of the “EXT” line starts
flashing.
4 Press the DATA l (or j) button to select the
recording speed mode (ex: L24), then press the
SHIFT * button.
ø
“N” will start flashing.
5 Press the DATA l (or j) button to select “Y”.
@@@@@@<TIMER@SET>
WEEK@START@@STOP@@@SPD
SUN@@--:--@@--:--@----@N
MON@@--:--@@--:--@----@N
TUE@@--:--@@--:--@----@N
WED@@--:--@@--:--@----@N
THU@@--:--@@--:--@----@N
FRI@@--:--@@--:--@----@N
SAT@@--:--@@--:--@----@N
DLY@@--:--@@--:--@----@N
EXT@@*****@@*****@@L24@Y
6 Follow steps G and H under “PROGRAM TIMER
RECORDING on page 31”.
ø
When an external signal is input, “E” will light on
the digital display and recording will take place.
NOTES:
œ Other timer recordings using the standard procedure
can also be programmed.
œ The external input signal must be input at the EXT
TIMER IN terminal.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000
English 35