Filter
Top Products
CLOCK ADJUSTMENT
When using 2 or more VCRs of this same model, the
clock on the second VCR and on, can be synchronized
with the clock on the first VCR, using the CLOCK
ADJUSTMENT function.
1 Connect the CLOCK SET OUT terminal on VCR 1 to
the CLOCK SET IN terminal on VCR 2.
2 Repeat the procedure for all the other VCRs,
connecting the CLOCK SET OUT terminal on VCR 2
to the CLOCK SET IN terminal on VCR 3, and so on.
3 Press the MENU button to display the (MAIN MENU
1) menu.
4 Press the SHIFT ] button to select the “4. VARIOUS
SET 1” line, then press the MENU button.
ø
The (VARIOUS SET 1) menu appears.
@@@@<VARIOUS@SET@1>
*THREAD@CHECK@@@@Y
*REMOTE@@@@@@@@@@EJECT
*EXT@TIME@ADJ.@@@01:00
*TAPE@END@OUT@@@@PRE
*EJECT@SET
@@EJECT@MODE@@@@@EJECT1
@@OPERATION@@@@@@SLAVE
5 Press the SHIFT ] button, until the “EXT TIME ADJ.”
setting is flashing.
6 Press the DATA l (or j) button to set the hour at
which the adjustment will be conducted.
NOTES:
œ Be sure to set the same time on all the VCRs.
œ The clock adjustment cannot be set to “00:00”.
Example
@@@@<VARIOUS@SET@1>
*THREAD@CHECK@@@@Y
*REMOTE@@@@@@@@@@EJECT
*EXT@TIME@ADJ.@@@07:00
*TAPE@END@OUT@@@@PRE
*EJECT@SET
@@EJECT@MODE@@@@@EJECT1
@@OPERATION@@@@@@SLAVE
7 Press the MENU EXIT button to save the setting.
ø
The setting procedure on the first VCR is now
completed.
8 Repeat the procedure for all the other VCRs, setting
“EXT TIME ADJ.” (to the same time as set on the first
VCR).
NOTES:
œ Connect the COM terminal on all VCRs used.
œ This function will not operate on the day the daylight
saving/standard time is changed.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000
44 English