Filter
Top Products
SETUP FOR RS-232C OR RS-485 USE
RS-232C 9-pin connector layout
Pin
number
Signal Operation Signal direction
2RXD
Receive
data
VCR ← Computer
3 TXD Send data VCR → Computer
7RTS
Request
to send
VCR → Computer
5GND
Signal
ground
The signal transmission is compatible with RS-232C
specifications.
CHECKING POWER FAILURE, FAILURE DUE TO
CONDENSATION AND USAGE DURATION
1 Press the MENU button to display the (MAIN MENU
1) menu.
2 Press the SHIFT ] (or \) button until the (MAIN
MENU 2) menu is displayed.
3 Press the SHIFT ] (or \) button to select the “3.
POWER/DEW/USED TIME” line, then press the
MENU button.
ø
The (POWER/DEW/USED TIME) menu appears.
Example
@@@@@<POWER@FAILURE>
002@FAILURE@@12-25@07:15
@@@@RECOVERY@12-25@07:30
@@@@@@@@@@<DEW>
001@FAILURE@@12-25@11:00
@@@@RECOVERY@12-25@12:00
@@@@@@@<USED@TIME>
VIDEO@@@@@@@@@@@00003H
POWER@@@@@@@@@@@00007H
POWER FAILURE . . . . The number of power
failures, and the date and
time of the most recent
power failure and recovery
are displayed.
DEW. . . . . . . . . . . . . . . The number of failures due
to condensation, and the
date and time of the most
recent failure and recovery
are displayed.
USED TIME . . . . . . . . . The video heads usage
duration and the power on
duration are displayed.
4 Press the MENU EXIT button, the normal screen is
displayed.
NOTE:
œ If the MENU RESET button is pressed while the
“POWER FAILURE” and “DEW” data is displayed, the
data is erased. The “USED TIME” data cannot be reset.
“@” will be erased from the digital display.
15
96
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000
48 English