Filter
Top Products
46
Manage Programs and Recordings
If the SATA drive is
improperly disconnected,
one of the following warning
banners appears.
If you improperly disconnected
the SATA drive from your DVR,
then attempt to reconnect the
drive to your DVR, one of the
following warning banners
appears. Follow the on-screen
instructions to restart the DVR.
If the power or data cables
for the SATA drive are
unplugged from the DVR, a
warning banner appears. Check
the DVR to make sure the power
and data cables are properly
plugged in.
If the DVR cannot read
the SATA drive, a warning
banner appears. Follow the
on-screen instructions to
format the SATA drive.
Close
Attention
Theexternalrecordingdeviceisnotfunctioningproperly.
Checktomakesurethepoweranddatacablesarepluggedinproperly.
Yes, Format Cancel
Attention
Theexternalstoragedeviceappearstobecorrupted.
Formatthisexternalstoragedevice?
NOTE:Existingrecordingsonthisexternalstoragedevicewillbeerased.
IfyoupressCancel,theexternalstoragedevicewillnotbeavailable.
Troubleshooting the SATA Drive
In the event that you encounter problems when connecting or disconnecting
your SATA hard disk drive, use the following warning banners to troubleshoot
any drive issues.
WARNING: Avoid electric shock. Unplug all electronic devices
before connecting or disconnecting any device cables
to the DVR.