Sony PDW-F70 DVD Recorder User Manual


 
12
Names and Functions of Parts
Chapter 1 Overview
Names and Functions of Parts
Front Panel
a On/standby 1 switch and indicator
When the POWER switch (see page 20) on the rear panel
is in the * (on) position, this switches the unit between the
operating state (the indicator is lit green) and the standby
state (the indicator is lit red).
When the indicator is lit red, pressing this switch puts the
unit into the operating state. The indicator initially flashes
green and then lights green when the unit enters the
operating state.
When the indicator is lit green, pressing this switch puts
the unit into the standby state. The indicator initially
flashes green, and then lights red when the unit enters the
standby state.
When using the unit, normally leave the rear panel
POWER switch in the * (on) position, and use this switch
to switch the unit between the operating and standby states.
b ACCESS indicator
This lights blue while a disc is being accessed and while a
file is open by a FAM or FTP connection. If the on/standby
switch is pressed while this indicator is lit, the unit waits
until access to the disc is completed before switching to the
standby state.
PHONES
VAR
JOG
MARK1
MENU
PAGEDISPLAY
SUB
CLIP
F1
F5
F4
F3
F2
SHIFT
CLIP
MENU
ESSENCE
MARK
SET
THUMB
NAIL
RESET
OUTIN
MARK2
SHUTTLE
TOP
KEY INHI
EXPAND
CHAPTER
F REV F FWD
END
PREV NEXTPLAY STOP
STANDBY
REC
EJECT
CH 1 CH 2 CH 3 CH 4
NETWORK
LOCAL
REMOTE
ACCESS
LEVEL
REC
VARIABLE
PRESET
PB
PHONES
VAR
JOG
MARK1
MENU
PAGEDISPLAY
SUB
CLIP
F1
F5
F4
F3
F2
SHIFT
CLIP
MENU
ESSENCE
MARK
SET
THUMB
NAIL
RESET
OUTIN
MARK2
SHUTTLE
TOP
KEY INHI
EXPAND
CHAPTER
F REV F FWD
END
PREV NEXTPLAY STOP
STANDBY
REC
EJECT
CH 1 CH 2 CH 3 CH 4
NETWORK
LOCAL
REMOTE
ACCESS
LEVEL
REC
VARIABLE
PRESET
PB
1 On/standby 1
switch and indicator
2 ACCESS indicator
3 Remote control switch
4 LEVEL knob
5 PHONES jack
6 SHIFT button
7 MENU button
8 SUB CLIP/CLIP MENU button
9 THUMBNAIL/ESSENCE MARK button
q; Disc slot and EJECT button
qa Infrared sensor
qs RESET button
qd SET button
1 Display and function menu section
2 Audio level adjustment section
Handle
3 Arrow buttons
4 Shuttle/jog/
variable-speed
playback control
block
5 Recording/playback control block