Filter
Top Products
74
Using the PDZ-1 Proxy Browsing Software
Chapter 4 Scene Selection
Using the PDZ-1 Proxy
Browsing Software
When a computer with the PDZ-1 Proxy Browsing
Software installed is connected to this unit, you can
transfer the proxy AV data and metadata files recorded on
a disc to the computer. On the computer side, PDZ-1
enables you to browse the proxy AV data, add or modify
metadata (titles, comments, essence marks, etc.), or create
a clip list.
The modified metadata and the created clip list can then be
written back to the disc loaded in this unit.
System requirements to use the PDZ-1
The following are required to use PDZ-1.
• Computer: PC with Intel Pentium III CPU, at least 1
GHz (installed memory: at least 512 MB)
• Operating system: Microsoft Windows 2000 Service
Pack 4 or higher, or Microsoft Windows XP
Professional Service Pack 1 or higher
• Web browser: Internet Explorer 6.0 Service Pack 1 or
higher
• DirectX: DirectX 8.1b or higher
To install PDZ-1
Insert the supplied CD-ROM (PDZ-1 Proxy Browsing
Software) in the CD-ROM drive of the computer and
execute the Setup.exe file, then follow the installation
instructions.
For details, refer to the ReadMe file on the CD-ROM.
Make sure that the work folder to store the material
transferred from this unit is on a hard disk drive with
adequate free space. The amount of proxy AV data
transferred is up to 2.8 GB per disc (when recording in the
LP format).
For details, see “File Operations in File Access Mode”
(page 78).
Note