Filter
Top Products
51
Playback
Chapter 3 Recording and Playback
The maximum number of blocks may be larger than 1728
when the recorded duration of the clip is short. In this case,
the frame interval of expanded thumbnails is fixed at 1
frame. This allows you to view expanded thumbnails at
equal intervals.
To execute the expand function
1
With the thumbnail list displayed, select the clip that
contains the scene that you want to find.
2
Press the EXPAND (F5) button.
The selected clip is divided into 12 blocks, and the first
frame of each block appears in the thumbnail list.
3
As required, repeat step 2 once or twice.
Thumbnails cannot be further divided once their
duration reaches 1 frame.
To return to the thumbnail list screen of the
previous level
Hold down the SHIFT button and press the EXPAND
button.
To return to the thumbnail list screen
Press the RESET button.
4
When you find the thumbnail of the target scene, press
the SET button or the PLAY button.
If you press the SET button, a still image appears
showing the selected frame.
If you press the PLAY button, playback starts from the
selected frame.
Searching for Frames With Essence
Marks
Proceed as follows.
1
With the SUB CLIP button off, press the ESSENCE
MARK (SHIFT + THUMBNAIL) button, turning it
on.
The essence mark selection screen appears.
Essence marks not recorded on the disc are displayed
in gray.
To return to the thumbnail list screen
Press the RESET button.
2
Press the PREV or NEXT button, or press the M/
MARK1 button or m/MARK2 button, to select the
desired essence mark.
3
Press the SET button.
A list appears showing the frames which contain the
selected essence mark.
Note
Note
Number of block
PHONES
VAR
JOG
MARK1
MENU
PAGEDISPLAY
SUB
CLIP
F1
F5
F4
F3
F2
SHIFT
CLIP
MENU
ESSENCE
MARK
SET
THUMB
NAIL
RESET
OUTIN
MARK2
SHUTTLE
TOP
KEY INHI
EXPAND
CHAPTER
F REV F FWD
END
PREV NEXTPLAY STOP
STANDBY
REC
EJECT
CH 1 CH 2 CH 3 CH 4
NETWORK
LOCAL
REMOTE
ACCESS
LEVEL
REC
VARIABLE
PRESET
PB
3
22
1