Sony PDW-F70 DVD Recorder User Manual


 
81
Function Menu
Chapter
Chapter 6 Menus
6
Menus
Function Menu
The function menu provides access to frequently used
settings, such as input video signal selection and timecode
settings.
Menu settings are stored in nonvolatile memory and are
preserved even after the unit is powered off.
Function Menu Operations
The function menu appears on the LCD panel of this unit.
The following figure shows the buttons used in function
menu operations.
To display the function menu
The function menu is made up of the HOME page and
pages P1 and P2.
If the function menu is not already visible, press the PAGE
button to display it. The most recently accessed function
menu page appears.
The size of the monitor video section changes to the
smallest size when the function menu appears.
To display a different page
Each press of the PAGE button displays the next function
menu page in the order HOME
t P1 t P2 t HOME…
To clear the function menu from the screen
Press the DISPLAY button. The size of the monitor video
section increases.
To change the setting of a function menu
item
Use the F1 to F5 buttons.
Press the button to the right of each setting item to change
the value of the item. Keep pressing the button until the
value you want appears.
Function Menu Settings
The following tables list the setting items on each page and
describe their setting values.
HOME page
-12
0
-30
-20
-60
1
-40
-12
0
-30
-20
-60
3
-40
42
4 CH
MPEG HD SP
VITC REM:077
M
COOO1
1080 60I
16BIT 3
+
4
00:00.00:00
DF/NDF
NDF
P2
TC/VITC
VITC
TC MODE
PRESET
TCG
EXT
RUN MODE
REC RUN
PAGE DISPLAY
F1
F5
F4
F3
F2
Display
DISPLAY button
PAGE button
F1 to F5 buttons
Monitor video
section
Function Menu
(page 81)
Setting item Description
F1: V INPUT (video input) Selects the video input signal.
HDSDI: HDSDI signal
SG: Test signal from the
internal signal generator
F2: A1 INPUT (audio input
1)
F4: A3 INPUT (audio input
3)
Selects the audio input signals
assigned to audio channels 1
and 3.
HDSDI: Audio signal
multiplexed into HDSDI
signal
1)
ANALOG1: Analog 1 audio
signal
AES/EBU: Signals input to
DIGITAL AUDIO (AES/
EBU) INPUT 1/2 and 3/4
connectors
SG: Test signal from the
internal signal generator