Filter
Top Products
82
Function Menu
Chapter 6 Menus
1) Only when HDSDI is selected as the video input.
The signal name display flashes when the selected signal
is not being input. Input the selected signal, or select
another signal.
Page P1
Page P2
F3: A2 INPUT (audio input
2)
F5: A4 INPUT (audio input
4)
Selects the audio input signals
assigned to audio channels 2
and 4.
HDSDI: Audio signal
multiplexed into HDSDI
signal
1)
ANALOG2: Analog 2 audio
signal
AES/EBU: Signals input to
DIGITAL AUDIO (AES/
EBU) INPUT 1/2 and 3/4
connectors
SG: Test signal from the
internal signal generator
Note
Setting item Description
F1: CNTR SEL (counter
selection)
Selects the time data to display
in the time data display section.
TC: Timecode
UB: User bits
COUNTER: Elapsed recording
or playback time
F2: MONI CH (monitor
channel)
Selects the audio channels to
monitor.
CH 1/2: Channels 1 and 2
CH 3/4: Channels 3 and 4
F3: MONI SEL (monitor
selection)
Selects the audio monitor
signal output from the AUDIO
MONITOR connector and the
PHONES jack.
STEREO: Assign the channels
selected with MONI CH to
left and right.
MONO L (monaural L
channel): Output one of
the channels selected with
MONI CH.
MONO R (monaural R
channel): Output one of
the channels selected with
MONI CH.
MIX: Output monaural audio
mixed from the channels
selected with MONI CH.
F4: REC INH (recording
inhibit)
Turns recording inhibit mode
on and off.
ON: Recording inhibit mode on
OFF: Recording inhibit mode
off
Setting item Description
F5: CHAR SEL (Character
information display)
Turns the display of character
information in the monitor video
section of the LCD panel and
on an external monitor on and
off.
ON: Character information on
OFF: Character information off
LCD: Character information on
for the LCD panel only
Even when ON is selected, you
can forcibly turn off the
superimposition of character
information in HD output by
setting the SETUP MENU
>DISPLAY CONTROL >HD
CHARA item.
Setting item Description
F1: TCG (timecode
generator)
Sets the operation of the
internal timecode generator.
INT (internal): The count value
advances from a preset
initial value, or advances
consecutively from the
timecode of the last frame
recorded on the disc.
EXT (external): Synchronize
to the timecode input to the
TIME CODE IN connector.
SDI: Synchronize to the
timecode of the signal
input to the HDSDI
connector.
Setting item Description