Filter
Top Products
43
Timer Recording
Timer Recording
(Standard/VIDEO Plus+)
You can set the timer for a total of 32
programmes (8 programmes when using the
VPS/PDC function), up to 30 days in
advance.
There are two methods to set the timer: the
standard method and VIDEO Plus+ method.
• Standard: Set the date, time, and
programme position of the programme
manually.
• VIDEO Plus+: Enter the PlusCode number
designated for each TV programme
(page 45).
1 Press TIMER.
The “Timer List” display appears.
2 Select the “New Input” row, and press
ENTER.
3 Select an item using </, and
adjust using M/m. Then press ENTER.
The adjustable items are listed below.
“Pr/CH”: Sets the programme position.
“Date”: Sets the date (up to 30 days
later). Select a recording pattern by
pressing
M repeatedly to set the timer for
the same daily or weekly programmes.
“Start”: Sets the start time.
“Stop”: Sets the stop time.
“Extend”: Sets duration when a timer
recording is in progress. If the
programme set to be recorded daily or
weekly is extended, the manually
extended time set here will be added to
the subsequent timer recording times.
Note that when “VPS/PDC” is set to
“On,” you cannot make the “Extend”
setting.
• If you want to make the detailed
settings, select “Set Details” and press
ENTER. Select an item using M/m and
set using </,.
“Recording Mode”: Sets the recording
mode (page 41).
Setting the timer manually
(Standard)
+
RW
-
RWVR
-
RW
Video
-
RVR
+
R
-
R
Video
</M/m/,,
ENTER
TIMER
x REC
STOP
,continued