Filter
Top Products
20 (US)
Playing a Tape
Displaying the time counter and current time
You can turn the display on the screen on or off.
1 Press MENU and select 4.SET UP/USED TIME, then press
EXECUTE.
The SET UP menu appears.
[ SET UP ]
[ USED TIME ]
HEAD 00000H
REPEAT MODE
APC
STOP TIMER
TIMER PB END
DISPLAY
REW
REPEAT
ON
OFF
5M
THREAD CHECK
ON
2 Press CURSOR 4/$ to flash the setting of “DISPLAY”.
[ SET UP ]
[ USED TIME ]
HEAD 00000H
REPEAT MODE
APC
STOP TIMER
TIMER PB END
DISPLAY
REW
REPEAT
ON
OFF
5M
THREAD CHECK
ON
3 Select ON or OFF using CH +/–.
[ SET UP ]
REPEAT MODE
APC
STOP TIMER
TIMER PB END
DISPLAY
REW
REPEAT
ON
ON
5M
THREAD CHECK
ON
[ USED TIME ]
HEAD 00000H
4 Press EXECUTE, and then press MENU to return to the normal
display.
To switch the display between the time counter and current
time
Press DISPLAY.
Using the time counter
At the point on a tape that you want to find later, press COUNTER RESET
to reset the counter to “0H00M00S”. When you rewind or advance the tape
to this point, refer to the counter.
Notes
• When a tape is reinserted, the counter returns to “0H00M00S”.
• The counter will not work on tape portions with no recording.
• You can also refer to the time counter in the display window.
MENU
CURSOR
4/$
EXECUTE
DISPLAY
CH +/–
COUNTER
RESET