Filter
Top Products
32 (US)
Timer recording/playback
This section shows you how to let the VCR automatically start and stop
recording/playing a program. You can preset up to 8 programs.
Before you start...
• Check that the clock is set correctly.
• For timer recording, insert a tape with its safety tab in place. Make sure
the tape is longer than the total recording time you are programming.
• Turn on the power of the equipment to be used.
• Check that the SENSOR REC indicator is not lit. If it is lit, set the
SENSOR REC ON/OFF switch to OFF.
1 Press MENU and select 2.TIMER REC/PLAY SET, then press
EXECUTE.
The TIMER REC/PLAY menu appears and today’s date flashes.
[ TIMER REC/PLAY ]
0 4 – –:– – – –:– – – – SP
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
DATE START STOP MODE
2 Set the “DATE” to start recording/playing using CH +/–.
[ TIMER REC/PLAY ]
1 0 – –:– – – –:– – – – SP
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
DATE START STOP MODE
Note
You can preset the date within a one-month time frame only, except
for daily/weekly recording/playback, which remains effective until
changed.
To record or play the same program every day or every week, see “Daily/
weekly recording/playback” on page 34 (US).
3 Press CURSOR ” and set the time to start recording/playing using
CH +/–:
Press CURSOR ” to flash the hour under “START”, then set the hour
using CH +/– .
[ TIMER REC/PLAY ]
1 0 1 3:– – – –:– – – – SP
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
DATE START STOP MODE
Timer Recording/Playback
MENU
TIMER
ON/OFF
CURSOR
Z/z/4/$
EXECUTE
CH +/–
TIMER
6
rP
p
(