Filter
Top Products
42 (US)
Recording TV Programs
Presetting channels
This VCR is capable of receiving VHF channels 2 to 13, UHF channels 14
to 69 and unscrambled CATV channels 1 to 125. First, we recommend
that you preset the receivable channels in your area using automatic
presetting. Then, if there are any unwanted channels, disable them
manually. If you have decided which channels you wish to preset, set them
directly using manual presetting.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the VCR channel (the channel set by the RF CHANNEL
switch, channel 3 or 4). If your TV is connected to the VCR using audio/
video jacks, set the TV to video input.
• Press TV/VTR to display the VTR indicator in the VCR’s display
window.
• Press INPUT SELECT to display “TUNER” in the VCR’s display
window.
Presetting all receivable channels automatically
1 Press MENU and select 3. TUNER PRESET, then press EXECUTE.
The TUNER PRESET menu appears on the TV screen.
Make sure the setting of “NORM/CATV” is flashing.
[ TUNER PRESET ] 125CH
NORM/CATV
AUTO PRESET
MANUAL SET
NORM
ADD
2 Select NORM or CATV using CURSOR “/”:
• To preset cable TV channels, select CATV.
• To preset VHF and UHF channels, select NORM.
[ TUNER PRESET ] 125CH
NORM/CATV
AUTO PRESET
MANUAL SET
CATV
ADD
3 Press CURSOR $ to flash “AUTO PRESET”, then press EXECUTE.
All receivable channels are preset in numerical sequence. When no
more receivable channels can be found, presetting stops and the
picture from the lowest numbered channel is displayed on the TV
screen.
[ TUNER PRESET ] 125CH
NORM/CATV
AUTO PRESET
MANUAL SET
NORM
ADD
MENU
CURSOR
“/”/$
EXECUTE
CH +/–