Filter
Top Products
39 (US)
Additional Operations
Editing with another VCR
When recording on this VCR
Before you start editing
• Press INPUT SELECT to display “LINE” in the display window.
• Press TAPE SPEED (SP/EP) to select the recording tape speed.
• Set the [TV] / [VTR] switch on the remote commander to [VTR] .
1 Insert a source tape into the other (playback) VCR. Search for the point
to start playback and set it to playback pause.
2 Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press P PAUSE.
3 Press r REC on this VCR and set it to recording pause.
4 To start editing, press the P PAUSE buttons on both VCRs to release
the VCRs from pause.
For best results, press the pause button on the other VCR just before
pressing P PAUSE on this VCR.
To stop editing
Press the p STOP buttons on both VCRs.
When playing back on this VCR
Before you start editing
• Set the [TV] / [VTR] switch on the remote commander to [VTR] .
• Select the input to which this VCR is connected on the other (recording)
VCR.
1 Insert a source tape into this (playback) VCR. Search for the point to
start playback and press P PAUSE.
2 Insert a tape with its safety tab in place into the other (recording) VCR.
Search for the point to start recording and set it to recording pause.
3 To start editing, press the P PAUSE buttons on both VCRs to release
the VCRs from pause.
For best results, press P PAUSE on this VCR just before pressing the
pause button on the other VCR .
To stop editing
Press the p STOP buttons on both VCRs.
Notes
• To make your editing more precise, use the pause buttons on the VCRs.
• To cut out unwanted scenes while editing, press P PAUSE on the
recording VCR when unwanted scenes begin. When they end, press P
PAUSE again to resume recording.
INPUT SELECT
TAPE SPEED
r REC
P PAUSE
p STOP
[TV] / [VTR]
INPUT
SELECT
TAPE
SPEED
r REC
P PAUSE
p STOP
6
rP
p
(