Filter
Top Products
40 (US)
Recording TV Programs
This section shows you how to record TV programs.
Before recording, connect the antenna and TV to the VCR and set up the
VCR’s tuner.
Connecting the VCR and TV
A Use this hookup if you’re using:
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• separate VHF and UHF antennas
B Use this hookup if you’re using:
• a VHF-only antenna (you get channels 2-13 only)
• a cable TV system
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach the
external antenna connector (not supplied) so that you can connect the cable
to the VHF/UHF IN jack. If you have separate cables for VHF and UHF
antennas, you may use a U/V band mixer. For details, see page 41 (US).
SVO-1630
VHF/UHF IN
VHF/UHF OUT
VHF/UHF
VHF
UHF
UHF
VHF
A
B
C
Match the type of
connector on your
TV: A, B, or C.
or
or
Rear of TV
SVO-1630
VHF/UHF
VHF
UHF
UHF
VHF
A
B
C
Match the type of
connector on your
TV: A, B, or C.
For connector types
B and C, no UHF
connection is
required.
Rear of TV
or
or
VHF/UHF IN
VHF/UHF OUT