Filter
Top Products
Teledyne API Model 200A NO
X
Analyzer Instruction Manual, 02246, Rev. G, DCN 5247
9.1.3 Fault Diagnosis Using DIAGNOSTIC Mode
Diagnostic mode can be looked at as a tool kit of diagnostics to help troubleshoot the instrument.
To enter DIAG mode press SETUP-MORE-DIAG.
The diagnostic modes are summarized in Table 9-9-3. To access these functions, press SETUP-
MORE-DI
AG, then press NEXT, PREV to select the desired mode, then press ENTR to select
that mode.
9-11
PRINTED DOCUMENTS ARE UNCONTROLLED