Filter
Top Products
Teledyne API Model 200A NO
X
Analyzer Instruction Manual, 02246, Rev. G, DCN 5247
6 OPTIONAL HARDWARE AND SOFTWARE
Optional equipment offered with the M200A includes:
1. Rack mount with slides (P/N 01469)
2. Rack mount without slides, ears only (P/N 01470)
3. Rack mount for external pump w/o tray (P/N 0099701)
4. Stainless steel zero/span valves (P/N 01468)
5. Internal zero/span - IZS (P/N 01223)
6. 4-20mA, isolated outputs (P/N 01471)
7. Internal pump (P/N 01237)
6.1 Rack Mount Options
Rack Mount permits the Analyzer to be mounted in a standard 19" wide x 24" deep RETMA
rack.
1. Rack mount with slides
2. Rack mount without slides
The external pump can be ordered in the following configurations:
1. External pump pack – standard configuration
2. Pump pack with rack mount tray to enable slide out servicing
3. Pump pack with rack mount - fixed tray
6.2 Zero/Span Valves
The Zero/Span Valve option consists of two stainless steel solenoid valves. Connections are
provided on the rear panel for span gas and zero gas inputs to the valves, see Table 2-2-2. The
valves can be actuated by several methods as shown in Table 6-1.
6-1
PRINTED DOCUMENTS ARE UNCONTROLLED