Filter
Top Products
102
HD INITIALIZE
DISK MODE NORMAL
EXECUTE EXECUTE
HDD–A MASTER 160GB SLAVE
-----
HDD–B MASTER 160GB SLAVE DVD
HDD–C MASTER0 320GB MASTER1 320GB
MASTER2
-----
MASTER3
-----
HDD–D MASTER4 320GB MASTER5 320GB
MASTER6
-----
MASTER7
-----
HDD–E MASTER0 320GB MASTER1 320GB
MASTER2 320GB MASTER3 320GB
HDD–F MASTER4 320GB MASTER5 320GB
MASTER6 320GB MASTER7 320GB
N
O
R
M
A
L
30.1. Hard Disk Drive Initialization
When initializing hard disk drives, it is possible to select
recording modes including "NORMAL" or "MIRROR." (Refer to
p. 28, Hard disk Initialization.)
Notes
• Initializing a hard disk drive erases all images and other data
recorded on it. Therefore, before initializing, be sure to first
copy any needed data to a DVD-R/RW disc or USB memory
device.
• The disk mode is initially set to "NORMAL." If operating the
Digital Video Recorder in the normal mode, then there is no
need to change the disk mode. However, recording will begin
automatically when the Digital Video Recorder's power is
turned on, so it is recommended to initialize the hard disk.
Item Selection Description
DISK MODE Performs settings using the selected disk mode.
NORMAL: When the first hard disk finishes recording, the second hard disk
automatically begins to record.
MIRROR:
The same image is simultaneously recorded on both hard disks. Mirroring
is performed by the built-in hard disk and the hard disk expansion unit.
NORMAL / MIRROR
Note:
Underlined settings represent factory-preset settings.