Filter
Top Products
93
SYSTEM SETTING
PLAY DISK ALL
HD REMAINING TIME 0H
BUZZER ON
I/O TERMINAL MODE
CTRL OUT TERMINAL
SECURITY SETTING
CAMERA PRESET SETTING
CAMERA MODEL TOA–A
CAMERA BIT RATE 38400bps
RS232C BIT RATE 38400bps
RS232C FLOW CTRL OFF
RS232C RESPONSE ON
CONTROLLER BIT RATE 38400bps
CONTROLLER RESPONSE ON
DVR–ID 1
LANGUAGE SELECTION ENGLISH
A
L
L
Item
PLAY DISK
Description
Plays back the images stored on the connected hard disks in
order.
Selection
ALL
EXTENDED
MIRROR
HDD1 / HDD2
HD REMAINING TIME
In “Overwrite Protection” mode, when the remaining recording
time is shorter than the preset remaining time, the disk space
indicator flashes.
0
-
1
-
999 hours
I/O TERMINAL MODE For settings, refer to p. 94; I/O terminal mode setting.
CTRL OUT TERMINAL
For settings, refer to p. 95; Control output terminal setting.
SECURITY SETTING For settings, refer to p. 96; Security setting.
BUZZER
ON: Buzzer sounds when Priority or Alarm Event Recording
begins, or when the failure is detected.
OFF: Buzzer does not sound.
ON: Performs RS-232C flow control.
OFF: RS-232C flow control not performed.
ON / OFF
RS232C BIT RATE Set the RS-232C’s bit rate.9600 bps / 19200 bps /
38400 bps
CAMERA BIT RATE Set the control camera’s bit rate.
TOA-A: 9600bps / 19200 bps / 38400 bps
TOA-B: 9600bps / 19200 bps / 38400 bps
BOSCH: 2400 bps / 9600 bps
PELCO-D: 2400 bps
2400 bps / 4800 bps /
9600 bps / 19200 bps /
38400 bps
RS232C FLOW CTRL
CAMERA PROTOCOL
Set the camera protocol to be controlled by the RS-485.
TOA-A: Set to this position when connecting the cameras that
operates using protocol type A.
TOA-B: TOA-A: Set to this position when connecting the
cameras that operates using protocol type B.
BOSCH: TOA-A: Set to this position when connecting the
cameras that operates using BOSCH TC8560/TC700
series protocol.
PELCO-D: Set to this position when connecting the cameras
that operates using Pelco protocol type D.
TOA-A / TOA-B / BOSCH
/ PELCO-D
ON / OFF
RS232C RESPONSE
ON: Makes RS-232C communications responses.
OFF: Does not make RS-232C communications responses.
ON / OFF
CAMERA PRESET
SETTING
For settings, refer to p. 97; Camera preset pattern setting.
Set hard disks to be played back.
HDD1:
Playback can be performed in order starting from HDD-A,
-C, -E, and -A ….
HDD2:
Playback can be performed in order starting from HDD-B,
-D, -F, and -B….
*
1
27. SYSTEM SETTING
Settings can be performed for hard disks to be played back by
the Digital Video Recorder, hard disk remaining time, and
buzzer ON/OFF. It is also possible to set cameras, PCs
(RS232C) and remote controller communications specifications,
etc.