Filter
Top Products
37
1. Hold down the Multi-Screen key for 2 seconds or more.
The position setting screen is displayed.
2. Press the [ ], [ ], [ ], and [ ] keys to move the cursor.
3. Press the Camera selector key.
When the Camera selector key is pressed, the live screen corresponding to the selected camera output is
displayed in the position indicated by the cursor. A dark screen is displayed if the selected camera is not
connected.
4. Hold down the Menu key for 2 seconds or more.
When the Menu key is pressed, the setting screen is terminated in the current state, returning the display to
the live screen.
Notes
• If live picture of selected camera number is already displayed on the position setting screen, it is switched
with the live screen of the camera during selection.
• Position of camera images through Monitor 2 cannot be changed.
• When an alarm event occurs during display position setting, the alarm-activated camera image is recorded
but not displayed on the full screen.
L1 L2
POSITION SETTING
L3 L4
L
1
L1 L2
L3 L4
L
1
Hold down the Multi
-Screen key for
2 seconds or more
Hold down the
Menu key for
2 seconds or more
During Live images are displayed Position setting screen
14.2. Position Setting Display
Holding down the Multi-Screen key for 2 seconds or more when the live multi-segment split screen is
displayed displays the position setting screen. Camera images can be displayed at arbitrary positions on the
multi-segment split screen. The position setting for each multi-segment split screen is saved.