Filter
Top Products
76
REC SETTING
PRIORI TY REC SETT IN G
AUTO REC SETTING
PRE–REC SETTING
OVERWRI
TE ON
Item Selection Description
PRIORITY REC SETTING
AUTO REC SETTING
PRE
-
REC SETTING
OVERWRITE
For setting, refer to p. 77; Priority recording setting.
For setting, refer to p. 79; Auto-recording setting.
For setting, refer to p. 85; Pre-recording settings.
Select whether or not to allow the overwriting of hard disk recordings.
OFF: When all hard disks become full, recording is stopped to prevent older
data from being replaced with new data. If the usable recording time is
less than the Remaining Capacity Warning, the Disk Full LED will flash.
(Refer to p. 93; System Settings) To begin recording again, initialize the
hard disk. (Refer to p. 102; Hard Disk Drive Initialization.)
ON: When all hard disks become full, previous recorded older images is
automatically deleted and replaced with newer images.
ON / OFF
Note:
Underlined settings represent factory-preset settings.
23. RECORDING SETTING
Priority recording and Auto-recording (Normal recording and
Alarm Event recording) modes are available. In each recording
mode, “Recording ON/OFF,” “Recording rate,” and “Picture
quality” can be set for each camera. For the Digital Video
Recorder, data from the start to the end of a recording is
regarded as an event. (Refer to p. 38; Recording.)