TOA Electronics C-DR161 CU Series DVR User Manual


 
70
20.6. Operation Following Restoration From a Power Outage
20.6.1. Monitor Display
After a power outage, check the system, then display the live screen according to screen display settings
when Monitors 1 and 2 are started in the menu.
20.6.2. Recording
[If the power outage occurred during Normal video recording....]
Normal recording is made according to the set schedule.
[If the power outage occurred during an Alarm Event video recording....]
Alarm Event recording is reset. If the Alarm Event continues after the power is restored, then Alarm Event
recording resumes.
[If the power outage occurred during a Priority recording....]
Priority recording resumes after the power is resorted. If the Priority Recording Input mode is set to "Edge,"
then Priority recording resumes for a set post-alarm recording interval after the power is restored. If the
Priority Recording Input mode is set to "Level," then Priority recording resumes after the power has been
restored and continues until it is canceled at the Digital Video Recorder or remote controller.