TOA Electronics C-DR161 CU Series DVR User Manual


 
82
Item Selection Description
REC
REC RATE
QUALITY
ON / OFF ON: Recording is performed during Alarm event recording *
1
OFF:
Recording is not performed during Alarm event recording
*
1
Sets the recording rate during recording. *
1
*
2
EVENT For setting, refer to p. 83; Event setting.
*
1
Can be set for each camera.
*
2
For recording rate, refer to p. 44; Recording Rate and p. 116; Recording timetable.
Note:
Underlined settings represent factory-preset settings.
1 HIGH
2
3 MID
4
5 LOW
Sets the picture quality level for the recording *
1
1: 64 KB (High picture quality)
2: 40 KB
3: 32 KB
4: 24 KB
5: 16 KB (Low picture quality)
60 IPS / 30 IPS / 15 IPS /
8 IPS / 4 IPS / 2 IPS / 1 IPS /
1/2 IPS / 1/3 IPS / 1/5 IPS /
1/10 IPS / 1/20 IPS / 1/30 IPS
/ 1/60 IPS
REC RATE
EXCEPT EVENT
CAM
Set the recording rate for recording “Disable” cameras during
alarm event recording.
4 IPS / 2 IPS / 1 IPS / 1/2 IPS
/ 1/3 IPS / 1/5 IPS / 1/10 IPS /
1/20 IPS / 1/30 IPS / 1/60 IPS
/ INVALID
ALARM EVENT REC SETTING A
REC REC RATE QUALITY EVENT
CAM1 ON 8IPS 4
CAM2 ON 2IPS 3(MID)
CAM3 ON 15IPS 2
CAM4 ON 15IPS 1(HIGH)
CAM5 OFF 1/ 60 IPS 2
CAM6 OFF
--
CAM7 OFF
--
CAM8 OFF
--
CAM9 OFF
--
CAM10 OFF
--
CAM11 OFF
--
CAM12 OFF
--
CAM13 OFF
--
CAM14 OFF
--
CAM15 OFF
--
CAM16 OFF
--
REC RATE EXCEPT EVENT CAM 4IPS
TOTAL REC RATE 39.3750IPS
O
N
[ Alarm Event Recording Setting ]
Preset camera images are automatically recorded when an
alarm event occurs. Recording “Enable” (ON) or “Disable”
(OFF), recording rate, picture quality and event settings can be
performed for each camera. The recording rate for cameras
other than alarm event-activated cameras and the total
recording rate are both displayed near the bottom of the screen.
Note
If the disk mode is set to "Normal," then set Total Recording Rate to 120 IPS or less. If the disk mode is set to
"Mirror," then set Total Recording Rate to 60 IPS or less. Settings above these are not possible.
Total rec rate:
When Alarm Event Recording mode is set to "Sequence" :
The total recording rate for each of the cameras is displayed. If the recording rate for one camera is a smaller
value than "Recording Rate Other Than Event Cameras," then its recording rate is regarded as the "Recording
Rate Other Than Event Cameras” when calculating.
When Alarm Event Recording mode is set to "Last" :
Displays the total of the largest recording rate of one camera out of those to be recorded and the sum of
"Recording Rate Other Than Event Cameras" of other cameras (other cameras' recording rate is all regarded
as the "Recording Rate Other Than Event Cameras" even if each of their rates is smaller than that).