Filter
Top Products
66
Hard Disk Error HD ERROR
LED
Malfunction Log Display
Buzzer
FAILURE
Video Loss VD DETECTED
FAILURE
Fan Malfunction FAN FAILURE
FAILURE
Remaining Capacity
Warning
HD REM ST
HD FULL
Hard Disk Full HD FULL
HD FULL
: Flashing Red
: Solid Red
20.1. Stopping the Buzzer
Press the Cancel Alarm key to stop the buzzer.
20.2. Hard Disk Errors
An LED illuminates to indicate that an error has occurred with a connected hard disk drive. If the error has
occurred during video recording, the recording is continued on another hard drive, regardless of disk mode.
However, if the Digital Video Recorder is a single-drive unit (product number ending in -08, -1, D08, or D1),
then recording is stopped.
Note
If a hard disk error has occurred, the Digital Video Recorder may not recognize not only the hard disk that an
error has occurred but also the DVD drive connected to the slave.
20.2.1. "Playback Stopped" Warning Display
If a hard disk error prevents playback in progress from
continuing, then the warning message shown at right is
displayed.
Press the Stop key to return to Live mode.
AN ERROR HAS BEEN DETECTED
ON THE HARD DISK CURRENTLY
BEING USED FOR PLAYBACK.
PLAYBACK WILL STOP.
VERIFICATION:PLAYBACK
STOP KEY
20. MALFUNCTION OPERATION
Causes of malfunctions and related operations are shown below. Activating the Buzzer setting will cause the
buzzer to sound when a malfunction occurs. Activating the Control Output Terminal setting and Device
Malfunction setting will cause the terminal to output a signal when a malfunction occurs.