Filter
Top Products
41
15.6. Recording State
The Digital Video Recorder permits recordings to be set to best meet user requirements.
[ Auto recording (Normal recording) ]
Recording is performed as shown in the following figure when set to always automatically record (Normal
recording):
Recording within a scheduled time period
Priority recording
Normal recording
Alarm event recording
Alarm input recording
Motion-detected recording
1
2
3
4
5
6
Priority recording
start
End
Alarm event
start
End
Start
End
(1) Priority recording is initiated if Priority recording's event occurs.
(2) When the Priority recording ends, recording reverts to Normal
recording mode.
(3) Alarm Event recording is initiated if the alarm input terminal
receives a signal or if motion movement is detected.
(4) When the preset Alarm Event recording interval elapses, recording
reverts to Normal recording mode.
(5) Priority recording is initiated if a Priority signal is received or if
manually started during Alarm Event recording.
(6) When the Priority recording ends, recording reverts to Normal
recording.
Notes
• Perform Normal recording settings in auto recording settings.
• Normal recordings are factory-preset to “recordings ON" for all
cameras.
15.4.2. Normal recording
This function automatically records camera images set by schedule. For Normal recording, settable items for
each individual camera include: Recording ON/OFF; Recording Rate; and Picture Quality. (Refer to p. 81;
Normal Recording setting.) Recordings can be made on scheduled patterns like "day and night," and
"weekdays and holidays” by combining two or more programs.
15.5. Pre-Recording
This function records images immediately before Priority recording or Alarm Event recording is initiated.
Setting the Pre-Recording interval to 1 second or more allows Pre-Recording to be performed. In Pre-
Recording, the recording rate and picture quality cannot be individually set for each camera. Instead,
recording rate, picture quality, and audio ON/OFF settings are common to all connected cameras. The
maximum recording rate per camera is 4 IPS. (Refer to p. 85; Pre-Recording setting.)
Pre-Recording can be performed under the following conditions.
• When Priority recording begins while recording is stopped.
• When an alarm event occurs and alarm even recording begins while a schedule in which Normal Recording
is not available but Alarm Event Recording is available is in operation.
Note: Pre-Recording cannot be performed during Normal Recording.