Filter
Top Products
92
TRANSMISSION SETTING
CAM1 YES PRIORITY REC NO
CAM2 YES FAILURE NO
CAM3 YES SYSTEM OPERATE YES
CAM4 YES
CAM5 YES
CAM6 YES
CAM7 YES
CAM8 YES
CAM9 YES
CAM10 YES
CAM11 YES
CAM12 NO
CAM13 NO
CAM14 NO
CAM15 NO
CAM1
6NO
Y
E
S
Item Selection Description
CAM 1 – 16 (1 – 9) ON: Transmits emails when the Alarm Event recording begins.
OFF: Does not transmit emails even if the Alarm Event recording begins.
PRIORITY REC ON / OFF ON: Transmits emails when Priority recording begins.
OFF: Does not transmit emails even if Priority recording begins.
ON / OFF
FAILURE ON / OFF ON: Transmits emails when Failure log is added.
OFF: Does not transmit emails even if Failure log is added.
When set to ON, following logs are transmitted.
Video Lost occur, Video Lost reset (image return/ setting invalid/ release
operation), Remaining Capacity Warning start, Remaining Capacity Warning
reset, Hard Disk error, Hard Disk full, Hard Disk full reset, Fan failure
SYSTEM OPERATE
ON / OFF ON: Transmits emails when System log is added.
OFF: Does not transmit emails even if System log is added.
When set to ON, following logs are transmitted.
Power ON, Hard disk initialization, Login (Operation Level 1, 2 and 3),
and Logout
Note:
Underlined settings represent factory-preset settings.
26.1. Transmission Condition Setting
Set conditions for transmitting emails when alarm is triggered,
motion is detected, Priority Recording begins, equipment fails,
or power is switched on.
[ Sent Mail Content ]
Subject: C-DR161 Callout Mail (For 16-channel units)
C-DR091 Callout Mail (For 9-channel units)
Content: REPORT ALARM CAM (For an Alarm Event Recording; is the camera number)
REPORT PRIORITY (For a Priority recording)
REPORT FAILURE (For an Equipment Malfunction)
REPORT SYSTEM OPERATION (For System Operation)
DVR ID ; (DVR ID; is the set DVR number)
DVR NAME : (DVR name; is the set DVR name)
Notes
• It is not possible to attach screen shots to sent mail.
• If katakana is used for DVR name, will be displayed for the DVR name to be transmitted.