Toshiba 58L9300UC Cable Box User Manual


 
Connecting Your TV
41
Using the TV remote and HDMI
CEC Control to control other
devices
To control the basic functions of connected audio/video devices using
the TV’s remote control, connect an HDMI
CEC compatible audio
system or playback device. The HDMI
CEC Control feature uses CEC
technology as regulated by the HDMI
standard.
HDMI
OUT HDMI IN
HDMI
OUT
HDMI
OUT
HDMI IN
4
HDMI IN
TV back panel
HDMI
TM
cable
HDMI
TM
cable
Playback device
Audio receiver
Playback device
(HDMI™ CEC DVD player, etc.)
(HDMI™ CEC DVD player, etc.)
(Sample Illustration) L9300UC Series—Connecting an HDMI
CEC
compatible audio system and playback device
To connect an audio system and playback devices, you will need HDMI
cables, see “HDMI™ cable (with HDMI Logo)” on page 30.
NOTE
If several devices are connected, HDMI
CEC Control feature may not
operate properly, see “HDMI™ CEC Control input source selection” on
page 94.
For proper operation, it is recommended that you use HDMI
cables
with the HDMI
Logo ( ).
HDMI
CEC devices can be controlled by TV remote only when it is
the TV mode.
Before controlling the devices:
For an explanation of setup and operations, see “Other HDMI™
CEC Control functions” on page 94.
Congure the connected devices. See each device’s operation
manual.
NOTE
This feature is limited to models incorporating Toshiba’s HDMI™ CEC
Control feature. However, Toshiba is not liable for those operations. See the
individual instruction manuals for compatibility information.
Using the TV remote and HDMI
CEC Control to control other devices
Connecting an HDMI
or DVI device to the HDMI
input