Toshiba 58L9300UC Cable Box User Manual


 
98
Basic features
NOTE
If you do not operate the TV for 1 hour after it is powered on by the On
Timer feature, it turns off.
To cancel the timer:
1 Press the SETUP button.
2 Select Timers > On Timer.
3 Press the OK button.
4 Press the
p
/
q
(arrow) buttons to select Enable On Timer and
press the OK button.
5 Press the
t
/
u
(arrow) buttons to select Off.
Setting the sleep timer
You can set the TV to turn off after a specic amount of time
(maximum = 12 hours).
Using the remote control:
1 Press the SLEEP button.
2 Set the amount of time until the TV turns off.
Repeatedly press the SLEEP button to increase the time.
Press the
p
/
q
(arrow) buttons to increase or decrease the time.
Using the on-screen menus:
1 Press the SETUP button.
2 Select Timers > Sleep Timer.
3 Press the OK button.
4 Select the amount of time until the TV turns off.
Use the number buttons.
Press the
p
/
q
(arrow) buttons to increase or decrease the time.
NOTE
If a power failure occurs, the sleep timer setting may be cleared.
To display the time remaining until the TV turns off, press the SLEEP
button.
To cancel the sleep timer, press the SLEEP button repeatedly or press the
p
/
q
(arrow) buttons until it is set to 0 minutes.
NOTE
When the following features are set, the feature that is set for the nearest
time will function.
Viewing the HDMI
signal information