Filter
Top Products
84
Basic features
2 Select 3D > 3D Important Info.
Read through the information.
3 Press the
t
/
u
(arrow) buttons to select Yes or No and press the OK
button.
Adjusting 2D to 3D depth
With this feature, you can adjust the level of 3D depth.
Within the Menu:
1 Press the SETUP button.
2 Select 3D > 2D to 3D Depth and press the OK button.
3 Press the
t
/
u
(arrow) buttons to select either 1, 2, 3, 4, or 5, and
press the OK button.
Within the Quick menu:
1 Press the QUICK button in 2D to 3D mode.
2 Select 3D Settings > 2D to 3D Depth.
3 Press the
t
/
u
(arrow) buttons to select either 1, 2, 3, 4, or 5, and
then press the OK button.
Switching left and right images
The left and right images of the glasses can be swapped. If 3D images
look blurred, switch the left and right sides of the 3D image.
1 Press the QUICK button to open the Quick menu.
2 Select 3D Settings > Left and Right Image and press the OK
button.
3 Press the
p
/
q
(arrow) buttons to select Swapped.
Adjusting your viewing position (for 65/84L9300UC only)
If you experience a double image when viewing 3D content, adjust your
viewing position.
1 Press the SETUP button.
2 Select 3D > 3D Test Pattern and press OK.
The 3D Test Pattern is displayed.
3 Put on the 3D glasses (supplied).
4 Adjust your viewing position so that there is no double image effect.
For the correct position for viewing 3D content, see page 8.
Tuning Channels