Toshiba 58L9300UC Cable Box User Manual


 
94
Basic features
A non-HDMI
input is selected
The Enable HDMI CEC Control item is set to Off
The connected HDMI
CEC device is not a playback, recording or
tuner device
HDMI
CEC Control input source selection
If an HDMI
CEC device with HDMI
switching capability (e.g. an
amplier) is connected to the HDMI
input, you can select another
HDMI
CEC device that is connected to the master HDMI
device.
Use the INPUT button on the remote control or the control panel, see
“Learning about the remote control” on page 53.
Adjusting the amplifier’s audio
Using the TV’s remote control, you can adjust or mute the sound volume
of your audio system.
The VOL (+ -) buttons adjust the volume level.
The MUTE button turns off the sound.
1 Press the SETUP button.
2 Select Options > HDMI CEC Control Setup and press the OK
button.
3 Press the
p
/
q
(arrow) buttons to select Initial Speaker Setting
and press the OK button.
4 Press the
p
/
q
(arrow) buttons to select Amplier.
NOTE
Confirm that a connected HDMI
CEC device (such as DVD player, etc.) is
selected for the Amplifier input source.
NOTE
You can also use this function when the audio system is connected to
the TV’s DIGITAL AUDIO OUT terminal (not HDMI
connection).
Select a digital audio input mode on the amplifier.
These functions depend on the device connected.
Other HDMI
CEC Control functions
When Enable HDMI CEC Control and all items in the HDMI
CEC
Control Setup menu are set to On, the following functions will be
enabled:
Lockingspecicchannels