Filter
Top Products
22
English
SETTING UP YOUR TV
To delete a transponder:
a In the Transponder Settings menu, press B / b
to highlight the line you want to delete.
b Press the RED button.
To edit the Transponder Settings:
a In the Transponder Settings menu, press B / b
to highlight the line you want to edit and press OK.
b Press C / c to select Frequency, Polarisation,
Symbol Rate or S/S2, and set the item using the
number buttons and
B / b if necessary.
c Press OK to save your settings.
d Repeat steps 1 through 3 for other lines.
e Press the BLUE button to finish editing and return
to Satellite Settings.
Press the GREEN button to cancel any edits that
were made.
Press the YELLOW button to reset all transponder
settings to their initial default settings.
To select the Dish Type:
a In the Satellite Settings menu, press B / b to
select the required satellite line and press OK.
b Press C / c to highlight Dish and press the
GREEN button.
c Press c and B / b to select Dish Type. You can
select Movable or Fixed as the Dish Type.
To select the LNB Settings:
a In the Satellite Settings menu, press B / b to
select the required satellite line and press OK.
b Press C / c to highlight LNB and press the
GREEN button.
c Press B / b to select Lower LOF or Upper LOF
and use the number buttons (0-9) to input the
appropriate frequencies.
NOTE: As new services are broadcast, it will be necessary
to re-tune the television in order to view them.
Auto Tuning will completely re-tune the television and
can be used to update the channel list. It is
recommended that Auto Tuning is run periodically to
ensure that all new services are added. All current
channels and settings, i.e. locked channels, will be lost.
a Press and B / b to highlight Installation
icon.
b Press c and B / b to select Channel Tuning and
press OK.
c Press B / b to select Auto Tuning and press OK.
A message will appear, and then press
C / c to
select Yes and press OK.
d Press c and B / b to select DTV, DTV and ATV,
or ATV, if available, then highlight Start Scan and
press OK to continue with the Auto Tuning.
NOTE: If you have selected Others for the
Country field in the Installation menu, and
selected a tuning mode other than DTV, choose
the optimum ATV broadcasting system (B/G, I, D/
K or L).
The television will start to search for all available
DTV and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the Auto Tuning
screen will display the services found.
e Press B / b to move through the list to select a
channel and press OK to view.
Dish Settings
Dish : 1
Dish Type Fixed
LNB Settings
LNB : 1
Lower LOF 9750
Upper LOF 10600
Auto Tuning
Ant/Cable/Satellite
Satellite Settings
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
< Channel Tuning
DTV
DTV and ATV
ATV
Auto Tuning - Antenna
Tuning Mode DTV
Start Scan